Filter
Top Products
Playing and charging your iPhone or iPod
a) After selecting and placing the proper insert for your iPhone or iPod model, gently dock iPhone/iPod in Dock. When
docked, the iPhone or iPod will charge until fully charged while the iP28 is connected to an outlet with AC adaptor. Unit
will not charge iPhone or iPod when operating on batteries. It will not overcharge iPhone/iPod.
b) Press the Button to play iPhone/iPod, and again to pause.
c) Press or Button to adjust iP28 volume up or down.
e) Press OFF/reset Button to turn the iP28 and iPhone/iPod off.
Using Sleep Mode
• Press the Sleep Button while the iPhone/iPod is playing to enter sleep mode, and continue to press to step through
the available sleep times: 90, 60, 30 or 15 minutes. The will appear on the display. The iP28 will play for the
number of minutes set, growing gradually softer until shutting off both the unit and the iPhone/iPod at the set time. Press
the or Button to set your own sleep volume. Sleep volume setting is separate from your alarm or regular listening
volume selection.
Using Dimmer
• Press the Snooze/Dimmer Button during normal operation to adjust the brightness of LCD display. While operating
on AC current, the switch will toggle between high, medium, low and off settings. In battery mode, the display is off by
default. Press once to activate the display for about 3 seconds.
6
Listening and charging iPod/iPhone
Using Sleep Mode & Dimmer