iHome IP28 Portable Speaker User Manual


 
a) Depending on your location and the time of year, move the (Daylight Saving Time) Switch located inside the left
battery compartment on the bottom of the unit to +1 to add one hour (a DST icon will appear on the display) or to -1 to
subtract 1 hour.
b) Press and hold the Clock Set Button until the display flashes. Press the Alarm Button to toggle between 24 hour
(military) and 12 hour (standard) time display modes.
c) Press the Hour Button to adjust the hour setting (a PM indicator appears when time is set to PM; there is no AM
indicator)
d) Press the Minute Button to adjust the minute setting. When the correct time is displayed, press the Clock Set Button
again. Two beeps will indicate clock setting is complete.
Setting the Alarm
a) Press and hold the Alarm Button until the alarm time flashes to wake to iPhone/iPod (buzzer alarm sounds if no iPhone
or iPod is detected).
b) Press the Hour Button to set the desired alarm hour (a PM indicator appears when time is set to PM; there is no AM
indicator)
c) Press the Minute Button to set the alarm minute time. When the desired alarm time is displayed, press the Alarm
Button again. Two beeps will indicate alarm setting is complete. Alarm is now armed, indicated by the alarm clock icon.
Arming and Disarming Alarm (Turn Alarm Function ON and OFF)
Press the Alarm Button to arm or disarm alarm functions. When armed, the alarm icon appears in the display.
Resetting the Alarm to Come on the Next Day
When the alarm is sounding, press the OFF/reset Button to stop the alarm and reset it to come on the following day.
Snooze
Press the Snooze Button after the alarm sounds. The alarm will be silenced and come on again 9 minutes later. Snooze
can be pressed several times during the 1 hour alarm cycle.
Sure Alarm
The iP28 has a sure alarm feature: if the backup battery is installed, the buzzer alarm will still sound in the event of power
failure.
Setting the Clock
Using the Alarm
Using the iP28
5