Filter
Top Products
Listening to other portable audio devices
Using the Unit in Other Countries
6
You can play an MP3 player or other portable audio device through the iD99 via the Aux-in Jack.
1. Plug one end of a stereo audio patch cord (available at http//:www.ihomeaudio.com) into the headphone or line-out
jack on your device and the other end of the patch cord into the iD99 Line-in Jack, located on the back of the unit.
2. Press and release the Mode Button as needed until “Aux-in” appears in the lower part of display, indicating Aux-in
playing mode.
3. Turn on and play your device.
4. Press the or Button on the unit to adjust the system volume. You may need to adjust your device volume, too.
5. Press the Power Button to turn off the unit. Remember to turn off your device, too.
Different regions of the world use different FM radio frequency steps and ranges. You will need to select the one that
matches the standards in your region (USA, EUROPE, JAPAN, AUSTRALIA,or CHINA). The default setting is USA; if you
live in the US, you may skip this section.
1. Make sure the unit is OFF (not playing in any mode). Press and hold the Mode Button for about 5 seconds until “Radio
xxx” appears in the lower part of display. Press and release the + or - Button to set the “xxx” to your region.
2. Press and release the Mode Button again (or no button within 10 seconds) to exit the radio frequency setting mode.
Two beeps will confirm radio frequency setting.
P8
3. To memorize a station as a preset:
A. Press the Presets Button as needed to step through the 6 presets (P1 - P6) to the number you wish to assign, and
then hold the Presets Button until the selected preset number begins flashing in the display.
B. Press the + or - Button to tune the radio to a desired station. Hold briefly to have the radio autoscan/search for the
next clear station.
C. Press the Presets Button to confirm the setting, two confirmation beeps will confirm the setting and the preset
number you wish to assign. Repeat steps A-C to preset up to 6 stations.
4. To listen to a preset station at any time, press the Presets Button to choose the desired preset.
5. Press the or Button on the unit to adjust the system volume.
6. Press the Power Button to turn off the unit.
Sleep Operation
Sleep mode lets you sleep to iPad/iPhone/iPod or the radio, gradually lowering the volume until the unit shuts off at the
selected time.
1. Press the Bedtime Button to enter sleep mode. The Sleep Icon will appear on the display to indicate sleep mode.
Sleep mode has a Gentle Sleep feature which gradually lowers the volume. The unit will automatically turn off after the
selected sleep time.
2. You can adjust the sleep timer from 120, 90, 60, 30, 15 minutes or OFF by pressing the Bedtime Button again.
3. When the display changes back to show the real time, pressing the Bedtime Button once will show the sleep time
remaining. Pressing it again will change sleep time to next lowest increment.
4. iD99 has independent volume setting for sleep mode so you can adjust the sleeping volume without affecting the alarm
volume. Press the or Button on the unit to adjust the system sleep volume. The sleep volume will remain at that
level the next time you enter sleep mode until controls are changed.
5. To stop listening at any time, press the Power Button on the unit to turn it off.