Filter
Top Products
quick start
2
P4
2: docking your
iPad/iPhone/iPod
Dock 1: Select the insert for your iPhone or iPod and place in Dock 1. Gently dock
your iPhone or iPod. You can safely dock your iPhone or iPod without an insert
provided you use care.
Dock 2: Gently dock your iPad, iPhone or iPod onto the flexible 30 pin dock on Dock
2. The devices docked in Dock 1 and Dock 2 will charge while docked. Press the
Dock 1 or Dock 2 Button on the unit to play your iPad, iPhone or iPod.
Dock 1
Dock 2
3: Setting Clock with AutoSync
Dock your iPad, iPhone or iPod (see step 2). The unit will
attempt to autosync to the time on your iPad, iPhone or iPod.
This process takes about 3 seconds.
4: Radio
Press and release the Mode Button as needed to select FM
band. Press and release the + or - Button to tune in a station.
See page 5 for programming presets.
Attach AC adaptor cable to DC jack on back
of the unit and plug the other end into a wall
socket. Remove pull tab from the backup
battery compartment on the bottom of the
unit.
1: power
RESET
RESET
TEST
TEST
Use this insert
For this iPhone / iPod
iPhone 4
insert 19
iPhone 4
iPod touch 2G
insert 16
iPod touch 2G/3G
nano 6G/touch 4G
insert 20
nano 6G
iPod touch 4G
NOTE: Inserts provide the best stability for your iPhone or
iPod. If you do not have an insert for your iPhone/iPod, you
can safely dock it provided you always do so gently and
carefully. To purchase an insert visit www.ihomeaudio.com
or call iHome toll free at 1-877-446-6301 to purchase one.