Filter
Top Products
Sound is distorted Volume level is set too high Decrease the volume
Sound source is distorted If the iPad/iPhone/iPod original sound source (MP3) is old or of poor
quality, distortion and noise are easily noticed with high-power speakers.
Try a different file from a trusted source such as iTunes.
If you are using an external sound source try reducing the output volume
on the device itself. Also try turning bass boost OFF.
10
Troubleshooting
SolutionSymptom Possible Problem
Unit/adaptor gets
warm after extended
play at high volume
This is normal Turn unit off for awhile or lower volume
Lower EQ settings.EQ settings are too high.
Custom snooze time not set
Alarm not working
USB charging doesn’t
work
AM/PM time/alarm time not set correctly When setting clock or alarm time, take note of the AM/PM indicators
Alarm time or source selected for alarm 2 , not
alarm 1 or vice versa
Wake schedule setting is not correct
7 days is every day alarm, weekday is Mon-Fri, and weekend is Sat-Sun.
See page 4 for setting alarms.
Check that your USB cable is the correct kind for your device and that it
is correctly connected to the unit and to your device. Try switching the
US`B Mode Switch from the A or B position to its opposite. If this fails,
use the charger that came with your device.
Calendar is not set correctly, which can affect
wake schedule alarm operation
Device may not be connected properly or
may require special circuit
See page 3 for setting Clock/Calendar Section.
Make sure to set the alarm time and source for the alarm icon 1 or 2
that is shown on the clock display
Snooze time
is too long/short
Press and hold Snooze button then press + or - Button to adjust
P12