Filter
Top Products
Configuring the HBA30
Information
10. Abandon Abandons the changes in the current Configuration protocol local
buffer and reloads its contents from the HBA’s NVRAM.
11. Write Writes the current Configuration protocol local buffer to the HBA’s
NVRAM. Use this function any time you use a menu selection to modify
configuration data. When the NVRAM has been successfully written,
the Configuration protocol local buffer is reloaded from the HBA’s
NVRAM.
12. Quit Quits the Configuration protocol and returns to the EFI shell. You
must use the Write selection to write any changes to the HBA’s
NVRAM before quitting.
Table 5 Driver Configuration menu components (continued)
Menu Option Description