Filter
Top Products
A6826A PCI-X host bus adapter for Itanium Linux systems installation guide 29
Table 5 describes the Driver Configuration components.
Table 5 Driver Configuration menu components
Menu Option Description
NVRAM Parameters
1. Edit Adapter Settings Displays the Edit Adapter Settings menu.
2. Edit Advanced Settings Displays the Edit Advanced Settings menu.
3. Edit Database Displays the Edit Database screen.
4. Edit Boot Settings Displays the Edit Boot Settings menu.
Information
5. Show Database Displays the contents of the WWN database in table form.
6. Show Translation Displays the SCSI target id translation table. This table is a list of SCSI
tid and fibre channel loop id mapping pairs. Each entry in the table
consists of the following for each device:
• SCSI id (tid)
• Fibre channel loop id (lid)
• World wide port name (WWPN)
• World wide node name (WWNN)
All numbers are in hexadecimal. Tid values from 0x00 to 0x0A are
persistent, and tid values greater than 0x0A are assigned
sequentially as devices are discovered. Tid values greater than 0x80
are fabric-attached while those below 0x7F are
arbitrated-loop-attached.
7. Show NVRAM Buffer Displays the contents of the local NVRAM buffer in hexadecimal. This
is the local buffer containing changes made prior to using the Write
selection to commit them to the HBA’s NVRAM.
8. Info Displays the following HBA information:
• EFI device path
• Port WWPN
• Serial number
• SSVID and SSDID from NVRAM
Use the device path to determine which HBA configuration is displayed.
9. Help Displays a brief description of the menu selections.