Filter
Top Products
71
2.6.6 Static Routing
This router provides a Static Routing function when NAT is disabled. With Static
Routing, the router can forward packets according to your routing rules. The IP sharing
function will not work any more in Static Routing mode.
Note: The DMZ function of firewall will not work if static routing is enabled.
Parameter Description
Enable Static Routing Static Routing function is default disabled. You
have to enable the Static Routing function before
your routing rules take effect.
Destination LAN IP The network address of destination LAN.
Subnet Mask The subnet mask of destination LAN.
Default Gateway The next stop gateway of the path toward the
destination LAN. This is the IP of the neighbor
router that this router should communicate with on
the path to the destination LAN.
Hop Count The number of hops (routers) to pass through to
reach the destination LAN.