Filter
Top Products
61
UPnP smoothly connect to Internet sites without any
incompatibility problem due to the NAPT port translation.
2.6.5 ALG Setting You can select special applications that need
“Application Layer Gateway” to support here.
2.6.6 Static Routing You can disable NAT function and setup the routing
rules manually.
Click on one of the three NAT selections and proceed to the manual's relevant sub-
section.
Note: If NAT is disabled you the STATIC Routing feature will appear. You can
manually configure your network routing protocols here. See section 2.6.6 for more
information.