SPECIFICATIONS*
GENERAL
Frequency Bands 136 - 150.8 MHz
(FCC Type Acceptance Number) 146 - 162 MHz (AXATR-182-B5)
157 - 174 MHz (AXATR-182-C5)
DOC Number TR-182-D2
Frequency Stability 5.0 ppm
Channel Capacity
Select Model 16
Scan Model 192
System Model 192
Maximum Frequency Separation full bandsplit
Channel Spacing 30 kHz
Operating Temperature Range -30°C to +60°C
Maximum Relative Humidity 90% at 55°C
Battery Voltage 7.5 Vdc (nominal)
Dimensions (H x W x D)
less battery, knobs and antenna 140 x 69 x 38 mm (5.52 x 2.72 x 1.50")
with Extra High Cap. Battery 232 x 69 x 40 mm (9.15 x 2.72 x 1.58")
Weight
less battery and antenna 540 grams (19 ounces)
with Extra High Cap. Battery 907 grams (32 ounces)
TRANSMITTER
Rated RF Power Output 6.0 Watts
High / Low RF Power Output 6.0 Watts / 1 Watt (programmable per channel)
Maximum FM Deviation ±5 kHz
FM Hum and Noise -45dB (companion receiver)
Spurious and Harmonic Emissions -75 dBc
Audio Response +1 to -3dB (6 dB/octave pre-emphasis from 300 Hz to 3 kHz)
Audio Distortion less than 3% (at 1000 Hz tone, 3 kHz deviation)
RECEIVER
Sensitivity (12 dB SINAD) -116 dBm (0.35 µV)
Adjacent Channel Selectivity -80dB
Critical Squelch 10dB SINAD
Intermodulation -78dB
Spurious and Image Rejection -80dB
Audio Output 500 mW (24-ohm load impedance)
Audio Response +2 to -8dB (6 dB/octave de-emphasis from 300 Hz to 3 kHz)
Audio Distortion less than 5% (at 500 mW)
* These specifications are intended primarily for the use of the serviceman. See the appropriate Specifications Sheet for
the complete specifications.
LBI-38378
3