Filter
Top Products
FS-C Using with a Computer
FS-C Portable DTE Recorder 45
Mounting the FS-C (Macintosh)
1. Start the Mac computer and connect the FS-C’s COMPUTER I/O
port to the computer using a standard 6-pin to 6-pin FireWire
cable.
When mounted, the FS-C should appear on the computer's
desktop as shown below:
The FS-C appears as a FAT32 volume with a PC label.
2. Locate the FS-C on the desktop and open it up.
3. Open the folder with the most recent date code (for example,
“20050127-110345-01”). It should look similar to the following:
Before Connecting FS-C to a Computer
If clips have been assigned to a Reel folder: perform an Organize
Reels before connecting the unit to a computer.