Filter
Top Products
Quickstart
32 FS-C Portable DTE Recorder
Syncro Slave
This mode is for camcorders that do not have external
control or the tapeless control functionality compatible
with the FS-C.
• Syncro Slave mode requires that a tape be in the
camcorder for operation.
• The FS-C must be set to
Syncro Slave control mode.
• In this mode, the FS-C watches the record state of the
camcorder and follows its actions.
When Synchro Slave mode is entered from the menu, the
Home screen appears with the Pause indicator displayed in
the upper left-hand corner along with a
Y that indicates that
the FS-C is following the camcorder’s record state.
1. Verify that the FS-C is in STOP mode.
2. From the FS-C Home screen, press the
Right navigation
button several times until the
CONTROL screen appears:
3. Use the
Down navigation button to select Syncro Slave. The
dash on the left side of an item indicates it is the current
selection. The default value is
Local.
4. Press the
Select navigation button.
5. The beginning screen returns and a
Pause indicator
appears in the upper left-hand corner. Next to this symbol,
is a
Y indicating that FS-C is now following the record state
of the connected camcorder.
6. Now the FS-C will record at the same time the camcorder
records to tape.
CONTROL
LOCAL
-SYNCRO SLAVE
AV / C
TAPELESS