Filter
Top Products
Owner’s manual, remote control, FM antenna wire, iPod dock.
Plug the AC adapter into the12 VAC socket on the back of the radio.
If using the internal AM antenna, select INT AM switch position. If
using the external AM antenna, select the EXT SWITCH position. The
EXT SWITCH is not for FM antennas, simply attach your FM antenna
to the socket.
Grip the plastic piece on the bottom of the remote unit and pull it
out. If the battery drains replace it with a CR/DL2025. See installa-
tion diagram on reverse of remote.
Plug the Power Cord into an AC (mains) outlet. When it is rst
plugged in, it will be in the standby mode. In standby mode, only the
clock display is activated and the radio is off. To turn the radio on, use
a quick, short press of the power button that’s on the radio or the
remote. To place it back into standby mode, use a quick, short press
of the power button.
On the rear of the radio is a backup battery compartment that holds
2 AA alkaline batteries for backup of time in case of power failure.
Use only new batteries of exactly the same brand and type. The
batteries are not included.
WHAT YOUR RADIO INCLUDES
PREPARING YOUR RADIO FOR USE
PREPARING THE REMOTE FOR USE
POWERING THE RADIO
BACKUP BATTERIES
2
SOUND 100 OWNER’S MANUAL