Filter
Top Products
EGO 4000 PLUS OPERATION MANUAL
15
continued
When MP3 playback is stopped but power is
still on, you may
1. Press SCAN UP/DOWN button repeatedly
to find out the desired directory or the track.
2. Press PLAY/PAUSE button to start play from
this track on.
NOTE:
While playing, press SAS/+10 button to skip forward for
10 tracks each time.
REPEAT PLAY
While playing a CD/MP3 disc, you may press
MODE button to activate one of three different
repeat settings. Each successive press of MODE
button changes the setting:
1. One-Track Repeat - During playback, press
MODE button until “REPT 1” indicates on
the display. The current track will be repeated
continuously.
2. One-Directory Repeat - During MP3 playback
only, press MODE button until “REPT DIR”
indicates on the display. The current directory
will be repeated continuously.
3. All-Track Repeat - During playback, press
MODE button until “REPT ALL” indicates on
the display.All tracks will be repeated
continuously.
INTRO SCAN
You can preview the first 10 seconds of each
track to conveniently search for your desired
track. Follow the steps below to initiate Intro
Scan playback:
1. Stop playback by pressing STOP button.
2. Press MODE button until “INTRO” indicates
on the display.
3. Press PLAY/PAUSE button, and Intro Scan
starts at once from the first track.
4. To cancel Intro Scan, press STOP button.
14
OPERATING INSTRUCTIONS: CD/MP3
STOPPING PLAYBACK
CD/MP3 playback stops automatically at the end
of the last track or the last track of the last direc-
tory. To stop playback sooner, press STOP button.
If no further action is taken after 30 seconds
later, the player is automatically powered off. To
power off the unit quicker, press STOP button a
second time.
When a disc stops, the LCD display shows the
total number of tracks and total playing time for
CDs. For MP3s, the LCD display also shows total
number of directories and tracks.
SKIP SEARCH
To search forward or backward during playing,
press and hold down SCAN UP/DOWN button.
The LCD display will show the elapsed time
changing quickly. When the desired point is
reached, release SCAN UP/DOWN button to
resume normal playback.
NOTE: When you search to the end of the last
track or the beginning of the first track, it stops
automatically.
SPECIFYING A TRACK
CD
To select a desired track, press SCAN UP/DOWN
button repeatedly until the desired track is
found. The LCD display will show the track
number as you search.
MP3
While MP3 disc is playing, you may
1. Press SCAN UP button repeatedly to skip
forward to choose the track or directory
desired. Playback will begin automatically.
2. Press SCAN DOWN button once to skip
backward to the beginning of the current
track. Press SCAN DOWN button repeatedly
to skip backward to choose the track or
directory desired. Playback will begin
automatically.