Filter
Top Products
EGO 4000 PLUS OPERATION MANUAL
23
continued
RADIO” or “AL 2 RADIO” indicates.
When the desired alarm mode indicator is
shown, stop pressing UP/DOWN buttons, and
wait for a few seconds, the alarm mode is set
automatically, and you can also press SET button
to save it once you choose it .
Viewing Alarm Setting
Follow the steps below to view alarm settings
• Press ALARM 1/ALARM 2 button once, the
LCD display shows alarm 1 setting (include
alarm time and mode) for about 5 seconds
before resuming to the local time clock.
• Press ALARM 1/ALARM 2 button twice,
the LCD display shows alarm 2 for about
five seconds before resuming to the local
time clock.
• Press ALARM 1/ALARM 2 button repeatedly
to toggle between alarm 1 and alarm 2
settings.
Snooze Mode:
When alarm activates, you may press SNOOZE
button to postpone alarm for 5 minutes. While in
snooze mode, “SOONZE” indicator appears on
the LCD display.
22
OPERATING INSTRUCTIONS: CLOCK/ALARM
3. Press SET button to save settings or just
release buttons to save settings. The
corresponding alarm icons will indicate on
the display.
4. When the alarm sounds, press any button for
buzzer or STOP button for CD/MP3 or radio
alarm to deactivate the alarm. Otherwise all
alarms automatically shutoff in 5 minutes if
not manually deactivated before.
• Ensure player displays local time clock
before activating alarms. It takes 5 seconds
to resume local time clock after setting
clock/alarm or viewing alarm setting.
• The volume of the CD/MP3 alarm is at
previous listening level. Remember to
check listening level when setting alarms
to ensure it is the appropriate volume as
an alarm.
Setting Alarm Mode
The default alarm mode is buzzer but this can
be changed to CD/MP3 alarm or radio alarm
as well.
Follow the steps below to change alarm mode:
1. Either press ALARM MODE button repeatedly
or press UP/DOWN buttons to find the
desired alarm mode combination.
2. Press SET button to save settings or just
release buttons to save settings.
3. The corresponding alarm icons will indicate
on the display.
• If buzzer is selected, “AL 1 BUZZER” or “AL 2
BUZZER 2” indicates.
• If CD/MP3/WMA Alarm mode is selected,
“AL1 ” or “AL 2 ” indicates.
• If Radio Alarm mode is selected, “AL 1