Filter
Top Products
11
ELECTRONIC ANTI-SKIP PROTECTION
This CD player is equipped with an automatic 45 second Electronic Anti-Skip
Memory and an Anti-Rolling Mechanism that will eliminate virtually all skipping
under normal conditions. When you press the PLAY/PAUSE
button to begin
playback the player immediately begins to store 45 seconds of music in a solid
state memory that is impervious to shock. The player is always reading the disc
45 seconds ahead of the music you are hearing and storing that information in
the memory. If the player is subjected to shock or bumps of less than 45 seconds
duration you will not notice them at all. If the bumps last longer than 45 seconds
the anti-skip memory may be depleted and the player may skip or stop.
When playback begins the Anti-Skip indicator comes on and a series of "bars"
appear in the display. When all 5 "bars" appear the Anti-Skip memory
contains 45 seconds of music and is "full". If the player is bumped or shaken the
"bars" may start to disappear as the memory is depleted. If all 5 "bars"
disappear the memory is empty and the player may skip if the bumps continue.
When the bumps stop the memory starts to fill up again and all 5 "bars" will
reappear.
CONNECTION TO AN EXTERNAL AUDIO SYSTEM
You can connect this CD player to a home stereo system, receiver, amplifier, or
recorder if desired. Connect the LINE OUT jack of this CD player to the Left/Right
Auxiliary Inputs, Line Inputs, or Record Inputs of the external device. The connection
cable is NOT included. Set the DBBS(Bass Boost) switch of this CD player to the
‘OFF’ position. Be sure to follow the external source connection instructions for
the other equipment as well.
HD2850_ib.p65 8/10/01, PM 03:4911