Filter
Top Products
10
PROGRAMMED PLAYBACK
You can program the player to play only the tracks that you want to hear, in the
specific order that you want to hear them. Up to a total of 24 tracks can be
programmed. You may program certain tracks to play more than once if desired.
IMPORTANT: The player can only be programmed when it is in the Stop mode
and the total number of tracks and playing time appear on the display. If the
display is blank press the PLAY/PAUSE button to start the disc. When playback
begins press the STOP button. If the disc was playing, press the STOP
button so that the total tracks and playing time appear on the display.
1. While the total tracks and playing time appear on the
display press the PROG (Program) button. "PROG"
indicator flashes and Program No. "P - 01" appears.
2. Press SKIP FWD or SKIP REV button until
the first track to be programmed appears in the display.
Example: Track # 7.
3. Press the PROG (Program) button again to enter the
selected track in the memory. The track indicator
returns to a "00" and the Program No. advances to
"P - 02".
4. Repeat Steps 2 and 3 until you have entered up to a total of 24 tracks in the
memory.
5. Press the PLAY/PAUSE button to begin
programmed playback. The “PROG” indicator stops
flashing and remains in the display. The player will play
the tracks you selected in the programmed order. When
the last track has played the player stops and the total
tracks and playing time appear.
6. To cancel programmed playback press the STOP button twice. The program
will also be canceled if the CD Door is opened or if the power is interrupted.
HD2850_ib.p65 8/10/01, PM 03:4910