Filter
Top Products
4
POWER FAILURE INDICATION
If the battery is exhausted, or there is no battery installed and the power is interrupted,
the time and alarm settings will be lost. When power is restored the clock display
will return to its default setting 12:00 and begin counting forward from that point. If
you notice that the time on the display is incorrect, check your alarm settings as
well. If they are also incorrect this indicates that the power was interrupted and the
battery is exhausted. Replace the battery with a new one and reset both the time
and alarm settings.
POWER SOURCE
This radio is designed to operate on 120V 60Hz AC house current only. Attempting
to operate this radio from any other power source may cause damage to the unit,
and such damage is not covered by your warranty.
Be sure that the AC outlet you use is always live. Do not connect this unit to an
outlet that is controlled by a wall switch.
This unit has a polarized AC plug with one wide
blade and one narrow blade. This plug will only
fit into a matching polarized AC outlet. This is a
safety feature to reduce the possibility of electric
shock. If this plug will not fit in your AC outlet,
you probably have an outdated non-polarized
outlet. You should have your outdated outlet
changed by a qualified, licensed electrician. Do
not file the wide blade on the plug, or use an
adapter to make the plug fit into your outlet. This
defeats the safety feature and could expose you
to electric shock.
CKD9907_ib.p65 2001/4/17, PM 12:194