Filter
Top Products
11
5. Press PLAY/PAUSE button to begin programmed playback. The tracks you
selected will play in the programmed order. When all tracks have been played
the player stops.
NOTES:
A. You must select a track and enter it in the memory while the PROG indicator is
flashing (approximately 10 seconds). If the PROG indicator stops flashing the
track will not be entered in the memory.
B. If you press the SKIP + or SKIP buttons during programmed playback the
player will skip forward or back to the next track in your program, not the next
track on the disc.
ALARM OPERATION
You can chose to wake up to the electronic BUZZER, to AM/FM radio, or to the CD
player.
First check the wake up time setting by sliding the ALARM switch to the SET position.
Adjust the wake up time setting if necessary. See Setting The Wake Up Time
on page 6. Then set the ALARM switch to the ON position. The ALARM On
indicator appears in the display.
To wake to buzzer
Set the FUNCTION selector to the BUZZER position.
To wake to radio
Set the FUNCTION selector to the AM or FM position. Make sure that the radio
station is correctly tuned and the volume is set to the desired level.
To wake to CD
Set the FUNCTION selector to the CD position. Confirm that a disc is in the
player and the volume is set to the desired level.
At the selected wake up time the power will turn On and operate the buzzer,
radio or CD according to your selection. The alarm will continue for 60 minutes
and then shut itself off automatically and reset itself for the following day.
To stop the alarm immediately
Press the POWER button to turn the power Off. The alarm stops and resets
itself to repeat again the following day at the same time. To cancel the alarm
completely slide the ALARM switch to the OFF position. The alarm will not come
on again.
CKD9907_ib.p65 2001/4/17, PM 12:1911