Filter
Top Products
16
5.) To stop the radio immediately, press the POWER button. The radio stops and
the alarm resets itself for the following day.
6.) To cancel the alarm completely set the ALARM selector to ‘Off’. The Alarm
indicator disappears.
Wake To CD
1.) Set the ALARM SELECTOR switch to AL 1, AL 2, or AL 1+2.
2.) Load the desired disc in the player, select the CD function, turn the unit ‘On’
and press PLAY/PAUSE to begin playback. Adjust the volume to the desired
level to wake you up. Press STOP button to stop playback, and turn the
POWER ‘Off’ again.
3.) Set the ALARM MODE switch to ‘AUTO’. The ALM 1, ALM 2, or both indicators
appears in the display.
4.) At the selected wake up time the CD player turns on. It will play for 60 minutes
or until the end of the disc, whichever comes first, and then shut off and reset
itself for the following day.
5.) To stop the CD player immediately, press the POWER button. The disc stops
and the alarm resets itself for the following day.
6.) To cancel the alarm completely set the ALARM MODE switch to ‘OFF’. The
ALM indicator disappears.
You can also use the “Wake To CD” function to wake up to one specific track or to
a series of programmed tracks as follows:
• Program the specific track or series of tracks as usual.
Refer to “Programmed Playback” on page 13 if necessary.
• Press the PLAY/PAUSE button to begin programmed playback and adjust
the volume to the desired level to wake you up.
CKD3810_ib.p65 18/3/2002, 14:3816