Filter
Top Products
14
Important Notes About Programmed Playback
• After you enter the last track in the memory the PROGRAM indicator will
continue flashing for an additional 10 seconds. If you press the PLAY/PAUSE
button during that 10 second period, playback of the programmed trackss
will begin. If the PROGRAM indicator stops flashing before you press the PLAY/
PAUSE button, the player exits the programmed playback mode and
playback will begin on track 1 as usual. To play the programmed tracks press
the PROGRAM button again and then press the PLAY/PAUSE button.
• After all programmed tracks have played the player stops but the PROGRAM
indicator remains ‘On’ and the program remains in the memory. If you press
the PLAY/PAUSE button the programmed tracks will play again.
• To clear the program from the memory after the disc stops press the PROGRAM
button and then press the STOP button. The PROGRAM indicator goess
‘Off’ and the program is cleared. Opening the CD door also clears the program.
However the program cannot be cleared by pressing the POWER button to
shut the unit ‘Off’, or by switching to the radio function.
Program Repeat
You may use the Program and Repeat features together to repeat a programmed
sequence of tracks. Simply enter the desired tracks in the program memory as
described above, then press the REPEAT button twice to select ‘Repeat/All’ (the
Repeat and Program indicators will both come ‘On’). Press PLAY/PAUSE to
begin Program Repeat playback.
CKD3810_ib.p65 18/3/2002, 14:1014