Filter
Top Products
36
EMC CLARiiON CX300, CX500, and CX700 Initialization Guide
Configuring Your Host Server and Storage System
4. Connect the other end of the Port 1-3 cables as follows:
•In a system without MirrorView — to an HBA port
(direct-attach configurations) or switch port (SAN
configurations)
•In a system with MirrorView — Port 1 (CX500) or Port 3
(CX700) to a storage processor (SP) host port on the remote
storage system, or a Fibre Channel switch port.
Configuring Your Host Server and Storage System
You are now ready to configure your host server and storage system.
Refer to the appropriate checklist for your system in the EMC
Installation Roadmap for CX-Series and FC-Series Storage Systems
(P/N 069001166).
The Installation Roadmap and the most current versions of CX-Series
documentation are available on the EMC Powerlink website,
http://powerlink.emc.com. Once logged in to Powerlink, select Support >
Document Library for lists and .pdf versions of relevant manuals, notes, and
articles.
Copyright © 2003 EMC Corporation. All Rights Reserved.
EMC believes the information in this publication is accurate as of its publication date. The information is subject to
change without notice.
THE INFORMATION IN THIS PUBLICATION IS PROVIDED "AS IS." EMC CORPORATION MAKES NO
REPRESENTATIONS OR WARRANTIES OF ANY KIND WITH RESPECT TO THE INFORMATION IN THIS
PUBLICATION, AND SPECIFICALLY DISCLAIMS IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE.
Use, copying, and distribution of any EMC software described in this publication requires an applicable software
license.
Trademark Information
EMC
2
, EMC, CLARiiON, Navisphere, and PowerPath are registered trademarks and Access Logix, EMC ControlCenter, FLARE, MirrorView,
SAN Copy, and SnapView and are trademarks of EMC Corporation.
All other trademarks mentioned herein are the property of their respective owners.