Filter
Top Products
12
EMC CLARiiON CX300, CX500, and CX700 Initialization Guide
Initializing the Storage System
Initializing the Storage System
This section describes how to set critical startup parameters on the
storage system’s storage processors (SPs).
Before you begin the initialization process, have the network
administrator at your facility assign IP addresses for the storage
system, and complete the following worksheet. You will need this
information to complete the system setup.
Table 2 Initialization Worksheet
SP A SP B
Hostname
__________________________ __________________________
Up to 15 alphanumeric characters. Dashes are
acceptable. Special characters such as dots,
spaces, or underscores are not allowed.
Examples: Array1-A, Array1-B.
IP Address
__________________________ __________________________
Subnet Mask
__________________________ __________________________
Gateway
__________________________ __________________________
Change Management Port settings on SP A and SP B
to EMC-specific assigned value for added security? YES____ NO____