Filter
Top Products
32
EMC CLARiiON CX300, CX500, and CX700 Initialization Guide
Installing Optional Navisphere 6.X Software
Setting Initial Security Parameters
CAUTION
!
EMC strongly recommends that you set Navisphere 6.X security
parameters (including an administrator and domain) before
connecting to the LAN from which you will manage the storage
system.
However, be sure to initialize this system only if you do not want it
to be a part of another management domain. If this storage system
is part of a larger domain, set security on the system that will be the
master.
For a description of Navisphere 6.X security features, refer to the
EMC Navisphere Version 6.X Security Administrator’s Guide.
Using the Crossover Cable Via the LAN
1. To set initial security parameters while still connected to the SP
with the crossover cable:
a. Open your web browser on the service laptop.
b. In the URL window, enter the IP address assigned to the SP to
which the laptop is connected — with /setup appended, for
example, 10.42.12.100/setup
If you changed the Management Port from 80/443 to 2162/2163 in
the Storage Processor Networking Configuration setup screen
earlier, you must add the following to the IP address:
:2162
For example, your IP address would now look like this:
10.42.12.100:2162/setup
c. In the Navisphere 6.X Setup Pages that appear, set Security
and/or Privileged Users as needed.
2. Disconnect the crossover cable that links the service laptop to
your SP LAN port.
Security is automatically set for the other SP.