Filter
Top Products
EMC CLARiiON CX300, CX500, and CX700 Initialization Guide
33
Installing Optional Navisphere 6.X Software
Using the Serial Cable Via the Serial Port (Alternate Method)
To set initial security parameters while connected to the SP via serial
connection:
1. Open your web browser on the service laptop.
2. In the URL window, enter the following IP address:
192.168.1.1/setup
3. In the Navisphere 6.X Setup Pages that appear, set Security
and/or Privileged Users as needed.
Security is automatically set for the other SP.