Filter
Top Products
29.
SLOW MOTION
VCD/DVD only
During the playback press the SLOW button on the
remote control. First the disc will be played with half
speed. Each further pressing of the button reduces
the playback speed (up to 1/7 of the normal speed).
Continue the normal playback with PLAY.
REPEAT ONCE/REPEAT ALL
During playback press the key REPEAT 1/ALL on
the remote control.
DVD
One or all chapters/titles will be repeated.
VCD/CD
One or all tracks will be repeated.
NOTE: With a VCD REPEAT 1/ALL works only if
PBC is turned off.
SEARCH FOR A PREFERRED SCENE
1. During playback press the SEARCH key on the
remote control and highlight the item to be played
back (title, chapter or chapter time).
2. Enter the desired number or time with the
numeric keys.
3. Confirm with the SELECT key and the playback of
the found scene starts.
4. To exit the search menu, press the SEARCH key.
REPEAT A-B
1. During the playback press the REPEAT A-B key
to set the start point (A) for repetition.
2. Press this key again to set the end point (B). The
player automatically starts to repeat the section
between point A and B.
3. Press this key once again to resume the normal
playback.
PROGRAMMED PLAYBACK (UP TO 16 MEMORY
LOCATIONS)
1. During the playback press PROGRAM to invoke
the program menu.
2. Select memory location(s) with the arrow keys
and then enter the desired titles/chapters
numbers with the numeric keys.
Note: The input of a leading zero is not
necessary. Enter with the +10 key on the remote
control the tenth of the chapter/title/track number.
If the chapter/title/track number is larger than 10,
press first the +10 key and then the unit digit. The
input of numbers larger than the total number of
title/chapter/track numbers on the CD is useless.
Example:
To enter track 3, press "3".
To enter track 12, press "+10" and then "2".
To enter track 21, press "+10" twice and then "1".
3. Start the programmed playback with PLAY in the
menu or on the remote control. By pressing
PROGRAM again you can complete the
programming mode.
4. To delete the programmed items, select the items
and then press the CLEAR key on the remote
control. To clear all items, select the <CLEAR> in
the menu and then press the SELECT key on
remote control.
5. You can also finish the program mode by deleting
all the items in the program menu.
ZOOM (VCD/DVD)
By continued pressing of ZOOM on the remote control
you can zoom out 2, 3 and 4 times and zoom in 1/2,
1/3, 1/4 of the normal size of the picture.
If the picture is at 1/4 of its size, a further pressing of
the ZOOM key returns to the normal displaying size.
In the enlarged picture you can move with the arrow
keys.
ON SCREEN DISPLAY INFORMATION
When the player is turned on, press the DISPLAY key
on the remote control continuously. On the top of the
screen an information banner (current CD type, title
number, chapter number, playtime, audio language,
audio type, subtitle language and multi angle, etc.) is
displayed.
CHANGING THE AUDIO SOUNDTRACK
LANGUAGE (DVD/VCD)
You can change the initial adjusted audio language to
another language (Only possible with discs, which
contain several audio languages).
DVD
During the playback of a DVD press the AUDIO key.
The next audio language will be switched over and will
be displayed in the information banner on the screen.
Note: Audio can be played back in 8 languages
(depending on the DVD).
VCD
Pressing the AUDIO button during the playback of a
VCD changes the audio output mode: MONO L,
MONO R or STEREO.
NOTE: If no audio language is recorded this key
does not have any function.