Filter
Top Products
22.
THIS CD PLAYER IS A CLASS I LASER PRODUCT. HOWEVER, THIS CD PLAYER USES A
VISIBLE/INVISIBLE LASER BEAM, WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE. BE
SURE TO OPERATE THE CD PLAYER CORRECTLY AS INSTRUCTED.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING INTERFERENCE USE ONLY
THE RECOMMENDED ACCESSORIES.
FURTHER INFORMATION
Setting up location of the device
• Avoid vibrations, impact or tilted surfaces as the internal parts may be seriously damaged.
• Do not place heavy objects on the player.
• Never place the Player on amplifiers or other devices, which can become hot.
Avoid magnetic objects
• Keep magnetic objects such as speakers, at a distance from the player.
Condensation:
Moisture may concentrate on the lens if one of the following situations occurs:
• After turning on a heater.
• In a steamy or very humid room.
• After moving the player from a cold environment to a warm one.
If condensation takes place, correct operation may not be possible or the unit might not work correctly. Do not
turn on and do not use it for about 1 hour, until the player is dry.
Moving of the DVD player
• Before moving remove the CD from the player.
It is suggested to remove the CD and to turn off the player for periods of non use.
Saving energy
• It is recommended if the player is not used, to turn the function switch to the “OFF” position. If the player is
not used for a long period of time, the player should be unplugged from the AC socket.
14. CLEANING – Disconnect from mains power supply before cleaning. Do not use liquid or spray cleaners,
only use a damp cloth. Follow the care and maintenance instructions in this manual.
15. LIGHTNING – During lightning and longer periods of non-use please disconnect from mains power supply
and antenna.
16. SAFETY CHECK – After servicing the unit ask the customer service for a safety check.
17. OVERLOAD – To avoid fire and electric shock do not overload wall outlets and convenience receptacles.
18. ELECTROSTATIC DISCHARGE – Disconnect from mains power supply and remove batteries if unit
malfunctions. Reconnect after a short time.
CAUTION