Filter
Top Products
Section 2 Unpacking
2.1 Shipping Damage
You should have visually inspected the outside of the shipping carton and noted any damage on
the shipping bill you signed. After unpacking, if you find concealed damage to the loudspeaker,
save the packing materials for the carrier's inspection, notify the carrier immediately and file a
shipping damage claim. Although EAW will help in any way possible,
it is always the responsibility of
the receiving party to file any shipping damage claim.
The carrier will help prepare and file this claim.
2.2 Returning Product to EAW
If this loudspeaker must be returned to EAW, contact the EAW Service Department for a Return
Authorization. Use the original shipping carton and packing materials. If the shipping carton is
damaged, contact EAW for a new carton at a nominal cost. EAW will not be responsible for
damage caused by inadequate packing.
All units returned must have a factory Return Authorization Number. Any units received without
a Return Authorization Number assigned and written prominently on the outside of the carton
will be refused.
Section 3 Overview
This loudspeaker is intended for professional use. The construction, components, and hardware
have been designed to provide robust, reliable performance for its intended applications. Please
ensure that you fully understand proper installation and operation before use.
You will need to perform the following general tasks to properly put the loudspeaker into service.
Details concerning each task are provided in this manual.
1. Design and install a rigging system to support the loudspeaker in its intended location and
aimed in the desired direction.
2. Connect the loudspeaker to a power amplifier(s) selected to provide the output needed
for the loudspeaker in the application. In the case of powered loudspeakers provide
an ac mains supply as specified for the particular loudspeaker.
3. Set-up and adjust system gain, signal processing, and limiting, as needed to maximize the
loudspeaker's performance.
4. Provide training to operate the loudspeaker within its limits.
5. Provide regular inspection and maintenance to maintain the integrity of the installation
and performance of the loudspeaker system.
Section 4 Rigging / Mounting / Suspension
CAUTION: The rigging information provided herein is not all-inclusive. Rather it is intended as
a guide to the work scope involved and to some of the more important issues that must be
considered.
1