Filter
Top Products
19
Program playback
This function is for use with CD and VCD discs. By
selecting and programming the order of the tracks on
a disc to be played, you can create your own program.
One program can be stored in the system and contain
up to 99 tracks.
1. In stop mode, press PROGRAM on the remote con-
trol unit. The program mode display appears on the
TV screen and the front panel display.
2. Use the number (0 ~ 9,+10) buttons to input the
track numbers in a desired order.
If you attempt to program more than 99 tracks,
“ ” will be displayed.
3 .Repeat step 2 to add more tracks to the program
list.
4. To begin program playback, press PLAY/PAUSE /
ll or ENTER.
5. To stop playback, press STOP once.
6. To cancel the program, press STOP again.
Notes
• This function is not available when playing DVD and
MP3 discs.
• To repeat playback for the programmed tracks,
press REPEAT while in the program playback mode.
• The program sequence is canceled when you press
STOP twice, open the disc tray, or turn the
power off.
Playing DiscsPlaying Discs
Playing DiscsPlaying Discs
Playing Discs
Selecting the start time
This function allows you to start playback at any cho-
sen time on the disc.
When playing DVD discsWhen playing DVD discs
When playing DVD discsWhen playing DVD discs
When playing DVD discs
1. Press GOTO repeatedly, to display the following
menu on the television screen:
TITLE 02 / 05 CHAPTER 001 / 006
TITLE 02 / 05 TIME - - : - - : - -
- Use the number (0~9 / +10) buttons to input the
desired title or chapter number, and press ENTER to
start playback from that selection.
OR
- Use the / buttons to select the desired title or
chapter number, and press ENTER to start play-
back from that selection.
TITLE 02 / 05 CHAPTER 001 / 006
TITLE 02 / 05 CHAPTER 001 / 006
When playing Video CD discsWhen playing Video CD discs
When playing Video CD discsWhen playing Video CD discs
When playing Video CD discs
1. Press GOTO , the following menu appears on the
TV screen:
GOTO - - : - -
2. Use the number (0~9 / +10) buttons to input the
desired title or chapter number, and press ENTER
to start playback from that selection, but the time
you enter must be less than the total time of the
disc.
Note
• This function is useless in PBC (playback control)
ON.
program play indicator lights
up on the front panel display
PGM
programmed
numbers
track numbers