Filter
Top Products
26
Setup
Click Setup on your remote
control to access the setup
features. Using the arrow keys on
your remote control, scroll down
the list to highlight your selection
then click Enter or the right arrow
to select your choice. You can
select from:
Network, Wireless, System,
Miscellaneous, Version or
Wizard.
Network
Connection: Select Wired or
Wireless.
If you want to change the configuration of your setup you can press the Setup
button on the remote control.
For an explanation of the terminology used in the Setup function, please see
the Appendix.
Configuration: Select Static or
DHCP.
A DHCP-enabled router
automatically assigns IP
addresses to the devices on your
network. If you have a DHCP-
capable router in your network,
select DHCP here.
If you do not have a DHCP
capable router, you will select Static and provide the following information:
IP: Enter the IP address of the DSM-320.
Netmask: Enter the subnet mask of the DSM-320.
Gateway: Enter the IP address of the router on your network.
DNS: Enter the IP address of the domain name server.
Press Enter in a text field, to display the onscreen keyboard. You can enter
text either by using the onscreen keyboard, or by using the the digits and
letters on your remote control.