Filter
Top Products
1166
© 2005 Directed Electronics—all rights reserved
LLii--IIoonn BBaatttteerryy RReecchhaarrggiinngg
The PMP3520 comes with two Li-Ion rechargeable and removable batteries.
Charge the battery completely before using the PMP3520 for the first time by
following the steps below:
1. Connect the supplied AC Adapter to AC outlet, and plug in the other end of
the AC Adapter to the DC in-jack of the PMP3520.
2. While recharging, the power LED above the LCD screen will flash. If you turn
on the PMP3520 while recharging, you will see the power charging indica-
tion at the top of the LCD display.
3. When the battery is fully charged, the Power LED will stop flashing.
Disconnect the AC Adapter from the PMP3520.
NNOOTTEE 11::
Charge the PMP3520
oonnllyy
with the supplied AC Adapter.
NNOOTTEE 22::
Do
NNOOTT
open the battery cap while power is on.
NNOOTTEE 33::
You can still operate PMP3520 while it is being recharged;
but the recharging time will be longer.