Filter
Top Products
© 2005 Directed Electronics—all rights reserved
4411
d
2.
BBeeffoorree iinnsseerrttiinngg aa SSDD//MMMMCC ccaarrdd oorr MMeemmoorryy SSttiicckk
, slide the button up
to
ttuurrnn ooffff
the media player, if power is on.
3. Insert your SD card, MMC card, or Memory Stick into its slot in the cor-
rect orientation.
4. Press button to turn on media player.
5. If your SD/MMC card or Memory Stick has video, audio, or photo files in the
inserted card, change to appropriate mode, open the Memory Card folder
and select the file to play or view.
NNOOTTEE::
Before inserting or removing the SD/MMC card or Memory
Stick, turn the power off to the media player, otherwise files
on the media player and the card or stick might be corrupted!
NNOOTTEE::
If the memory card is removed before the file is stopped or if
a file is selected that is corrupted, the DMP may lock up. To
reset the unit push the power switch on the unit up and hold
for 5-seconds. If this fails to restore operation, use the Reset
button located on the back of the unit (see Getting Started for
use of the Reset button).
SSIIGGNNAALL OOUUTTPPUUTT
You can view the media player signal output on a large video device, such as a
TV set, to share your enjoyment with a larger group or send the signal to an
input of a VCR or DVD recorder. Also, you can input signals from a video device
to the media player, and record the signal into files utilizing the AV Recording
function (this was discussed previously).
1. Connect the media player AV-Out Jack to a TV with the supplied AV cable.
Note the AV cable should be connected correspondingly in color or text to
TV AV-In Jack.
2. Turn on your TV and switch it to Video (AV signal) mode.
3. Change Setting Menu\Display\Display option on media player to TV, you will