Filter
Top Products
2222
© 2005 Directed Electronics—all rights reserved
4. After connection is initialized, if your computer operating system fails to
recognize the media player as a hard disk, then go to [Device Manager] by
clicking "Start""Setting""Control Panel""System""Hardware", and
look for [Toshiba MK4025GAS] under [Disk Drive] to check connection sta-
tus. If the connection is failed, you will not find under Disk Drives a drive
with a similar name such as [Toshiba MK4025GAS or DMP740 USB Device
or DMP040 USB Device] (this is the hard drive in the media player).
Repeat this procedure from step 2 to connect the media player to your
computer.
FFOORR SSYYSSTTEEMMSS WWIITTHH WWIINNDDOOWWSS 9988SSEE
After connecting the media player to a Windows 98SE operating system com-
puter, the Windows system will detect the media player and ask to install driv-
er. Place the supplied driver CD in the CD-ROM drive, and refer to the Utility CD
section to complete the driver installation.
FFOORRMMAATT MMEEDDIIAA PPLLAAYYEERR AANNDD DDIISSKK MMAAIINNTTEENNAANNCCEE
We strongly suggest that you do
nnoott
format the media player’s hard disk! The
display interfaces will not function correctly if the hard disk is formatted. If you
do need to format hard disk, connect the media player to your computer first