Appendix A A-17
Error Code and Qualifier Reference
Library Error Codes
Error Code Reference Error Code Reference
Error Codes
47 2FH Drive module fan is not working
properly.
• Check for obstructions in
the drive fan.
• Try bringing the drive back
online.
• Replace the drive.
48 30H Failed to detect that the transport
has gotten a tape.
• Run
Test Lateral Library test,
Recalibrate Library test,
followed by
Check Inventory
test.
50 32H Did not stop where expected while
storing a tape.
• Run
Recalibrate Library test,
followed by
Check Inventory
test.
• Power cycle.
54 36H Did not stop where expected while
getting a tape.
• Run
Recalibrate Library test,
followed by
Check Inventory
test.
• Power cycle.
56 38H Failed to empty the transport
during an inventory check.
• Ensure there is a vacant
slot.
• Run
Recalibrate Library test,
followed by
Check Inventory
test.
57 39H Detected a a move above the
maximum vertical height.
• Run
Recalibrate Library test.
• Check magazines and
magazine targets on the top
level.
58 3AH Detected that the transport
translate frame was in crooked.
• Re-insert the translate
frame to ensure that it is
seated properly.
Table A-2 Error Code Qualifiers
Decimal
Error
Hex
Error
Description Recovery Method