Filter
Top Products
Trim Ring Mount Kits for the TPS-6X-DSW Crestron TMK/WMKT-6X-DSW
Setup
Supplied Hardware
The TMK-6X-DSW consists of a metal trim ring that attaches to the BB-6X-DSW or
PMK-6X-DSW. The WMKT-6X-DSW consists of the trim ring found in the
TMK-6X-DSW as well as a mounting plate, cutout template and mounting screws.
The mounting plate provides the necessary support for post-construction
applications. An overlay cutout template (4506370) is supplied which is similar to a
frame, the inner area of the frame is the shape of the required opening. Remove the
center of the frame in order to use the template, refer to the illustration on page 3.
Supplied Hardware for the TMK-6X-DSW and WMKT-6X-DSW
DESCRIPTION PART NUMBER QUANTITY
Metal, Plate, Trim Ring 2022808 1
Metal, Plate, Mounting
(WMKT-6X-DSW only)
2022811 1
Screw, #06-32 x 1 1/2”, Pan, Phil
(WMKT-6X-DSW only)
2007254 4
Overlay, Template, Wall Cutout
(WMKT-6X-DSW Only)
4506370 1
The dimensions of the TMK-6X-DSW and WMKT-6X-DSW are shown below and
on the next page.
Dimensional Drawing – Trim Ring
9.28 in
(23.58 cm)
6.39 in
(16.23 cm)
0.52 in
(1.33 cm)
1.04 in
(26.27 cm)
4.00 in
(10.16 cm)
2.23 in
(5.66 cm)
2 • Trim Ring Mount Kits for the TPS-6X-DSW: TMK/WMKT-6X-DSW Installation Guide – DOC. 6780A