Filter
Top Products
Crestron TMK/WMKT-6X-DSW Trim Ring Mount Kits for the TPS-6X-DSW
Trim Ring Mount Kits
for theTPS-6X-DSW:
TMK-6X-DSW & WMKT-6X-DSW
Introduction
These Trim Ring Mount Kits are the preferred method of mounting the Crestron
®
TPS-6X-DSW Wall Mount Docking Station when a finished appearance within a
neatly trimmed cutout is required. This application is perfect for wallpapering.
NOTE: If mounting into a material other than drywall (for example, wood lectern,
concrete, or rock) use the cutout template, available in the post-construction kit
WMKT-6X-DSW. For concrete and rock mounting material, allow for proper
ventilation before mounting the TPS-6X-DSW.
There are two Trim Ring Mount Kits. The TMK-6X-DSW is a pre-construction
accessory. Pre-construction refers to framed walls prior to hanging drywall. This
accessory must be used with either the Pre-Construction Mount Kit (PMK-6X-DSW)
or Wall Mount Back Box (BB-6X-DSW).
The WMKT-6X-DSW is a post-construction kit. Post-construction refers to framed
walls with drywall hung. This accessory is designed with a mounting plate so that it
can be placed anywhere on a wall without the support of a stud. The mounting plate
is also ideal for installing the TPS-6X-DSW in a lectern.
NOTE: Since the TPS-6X-DSW contains moving parts, mounting to a stud offers
more support and is therefore highly recommended. Although Crestron offers the
post-construction WMKM-6X-DSW mounting option, a mounting option that is
secured to a stud, such as the BB-6X-DSW or PMK-6X-DSW is highly
recommended.
NOTE: If necessary, consult the latest revision of the TPS-6X-DSW Operations and
Installation Guide (Doc. 6708) for a complete list of mounting options. The
document is available from the Crestron website (
http://www.crestron.com/manuals).
Installation Guide – DOC. 6780A Trim Ring Mount Kits for the TPS-6X-DSW: TMK/WMKT-6X-DSW • 1