Filter
Top Products
280-8178-00
VXZ758R 43
English
∗ This function cannot be operated when
CENTER-SP and SRD-SP are set to “OFF” in
“SP-SEL”.
∗ The factory default setting is “0 ms”.
1. Following the steps 1 to 3 in “Selecting the
monitor menu”, select “DELAY” from
“AUDIO SETUP”.
2. Press the [ENT] button to display the DELAY
screen.
3. Press “ ” or “ ” buttons to select the item.
Each time you press the buttons, you can switch
between center and surround speakers.
CENTER-SP
SRD-SP
4. Press “ ” button to go to the right pane.
5. Press “ ” or “ ” buttons to adjust the delay
time. The delay time ranges from “0 ms” to “5
ms” when you select “CENTER-SP”(1ms
step), or “0ms” to “15ms” when you select
“SRD-SP” (3ms step).
6. Press the [ENT] button.
Changing Initial Settings such as Menu Language, etc.
Adjusting the dynamic range
This function allows you to adjust the dynamic
range, the ratio of the loudest sounds to the
quietest sounds.
∗ The factory default setting is “MAX”.
1. Following the steps 1 to 3 in “Selecting the
monitor menu”, select “DRC” from “AUDIO
SETUP”.
2. Press “ ” button to go to the right pane.
3. Press “ ” or “ ” buttons to select the setting.
You can select the dynamic range from
“MIN”, “STD”, or “MAX”.
4. Press the [ENT] button.
Setting the Dolby Pro Logic
Decode processing
You can set whether or not 2-channel source is
processed using Dolby Pro Logic Decode.
∗ The factory default setting is “ON”.
1. Following the steps 1 to 3 in “Selecting the
monitor menu”, select “Dolby PL” from
“AUDIO SETUP”.
2. Press “ ” button to go to the right pane.
3. Press “ ” or “ ” buttons to select “ON” or
“OFF”.
4. Press the [ENT] button.
+VXZ758R_01-09-Eng.p65 05.3.3, 7:14 PM43