Filter
Top Products
280-8178-00
VXZ758R 19
English
4. Press the [ADJ] button to return to the previ-
ous mode.
∗ If the reception of the current broadcast station de-
teriorates, “PI SEARCH” appears in the display and
the radio searches for the same programme on an-
other frequency.
●AF function between RDS and DAB
When the same programme is broadcasted by
both RDS and DAB, and this function is ON, the
unit switches to receive the broadcast with the
better reception automatically.
∗ This function only operates when the DAH923 or
DAH913 DAB unit, sold separately, is connected.
∗ This factory default setting is “ON”.
1. Press the [ADJ] button to switch to the adjust
mode.
2. Press the [a]/[d] button to select “LINK ACT”.
3. Turn the [ROTARY] knob to select “ON” or
“OFF”.
● ON:
AF switching between DAB and RDS enabled.
● OFF:
AF switching between DAB and RDS disabled.
4. Press the [ADJ] button to return to the previ-
ous mode.
REG (Regional programme)
function
When the REG function is ON, the optimum regional
station can be received. When this function is OFF, if
the regional station area switches as you drive, a re-
gional station for that region is received.
∗ The factory default setting is “OFF”.
Notes:
• This function is disabled when a national station
such as BBC R2 is being received.
• The REG function ON/OFF setting is valid when
the AF function is ON.
1. Press and hold the [ADJ] button for 1 second
or longer to switch to the RDS mode.
2. Press the [a]/[d] button to select “REG”.
3. Turn the [ROTARY] knob to select “ON” or
“OFF”.
● ON:
“REG” is lit in the display and the REG func-
tion turns on.
● OFF:
“REG” goes off in the display and the REG
function turns off.
4. Press the [ADJ] button to return to the previ-
ous mode.
RDS Operations
Manually tuning a regional
station in the same network
1. This function is valid when the AF function is
ON and the REG function is OFF.
Note:
• This function can be used when a regional broad-
cast of the same network is received.
2. Press any one of the [DIRECT] buttons to call
out the regional station.
3. If the reception condition of the called out sta-
tion is bad, press the [DIRECT] button of the
same number. The unit receives a local sta-
tion on the same network.
TA (Traffic Announcement)
In the TA standby mode, when a traffic announce-
ment broadcast starts, the traffic announcement
broadcast is received as top priority regardless of the
function mode so you can listen to it. Traffic
programme (TP) automatic tuning is also possible.
∗ This function can only be used when “TP” is lit in the
display. When “TP” is lit, this means that the RDS
broadcast station being received has traffic an-
nouncement programmes.
●Setting the TA standby mode
If you press the [TA] button when only “TP” is lit
in the display, “TP” and “TA” light in the display
and the unit is set into the TA standby mode until
a traffic announcement is broadcast. When a
traffic announcement broadcast starts, “TRA
INFO” appears in the display. If you press the
[TA] button while a traffic announcement broad-
cast is being received, the traffic announcement
broadcast reception is cancelled and the unit
goes into the TA standby mode.
●Cancelling the TA standby mode
As “TP” and “TA” lit in the display, press the [TA]
button or [SRC] button . The “TA” in the display
goes off and the TA standby mode is cancelled.
∗ If “TP” is not lit, pressing the [TA] button searches
for a TP station.
●Searching for a TP station
When “TP” is not lit, if you press the [TA] button,
“TA” in the display lights and the unit automati-
cally receives a TP station by “TP-SEEK”.
Note:
• If a TP station is not received, the unit continues
the search operation. Pressing [TA] button again
goes off “TA” in the display and stops TP station
searching.
+VXZ758R_01-09-Eng.p65 05.3.1, 6:02 PM19