Filter
Top Products
8
English
M275
The control panel can be detached to prevent
theft. When detaching the control panel, store it
in the DCP
(
Detachable Control Panel
)
case to
prevent scratches.
We recommend taking the DCP with you when
leaving the boat.
2. Press in the
[
RELEASE
]
button.
3. Remove the DCP.
Attaching the DCP
1. Insert the right side of the DCP into the main
unit.
2. Insert the left side of the DCP to attach into the
main unit.
The DCP can easily be damaged by impact.
After removing it, be careful not to drop it
or subject it to strong shocks.
When the Release button is pressed and the
DCP is unlocked, the intense vibration and
stock may cause it to fall. To prevent dam-
age to the DCP, always store it in its case
after detaching it.
(
See figure above.
)
The connector connecting the main unit and
the DCP is an extremely important part. Be
careful not to damage it by pressing on it
with fingernails, pens, screwdrivers, etc.
CAUTION
!
Removing the DCP
1. Press the
[
SRC
]
button for 1 second or longer
to switch off the power.
∗ The DCP is unlocked
Note:
If the DCP is dirty, wipe off the dirt with a soft, dry
cloth only.
Storing the DCP in the DCP case
Hold the DCP, in the orientation as shown in the
figure below, and put it into the supplied DCP
case.
(
Ensure the DCP is in the correct orienta
-
tion.
)
6. DCP
(
Detachable Control Panel
)