Filter
Top Products
20
English
M275
Adjusting clock setting
2-1. Select “CLOCK”.
3-1. Press the
[ ]
button
3-2. Press
[
,
]
button to toggle HOUR
and MINUTE selection. the HOUR is selected
and blinking by default.
3-3. Turn the
[
ROTARY
]
knob clockwise to in
-
creases hour/minute or counterclockwise to
decrease hour/minute.
3-4. Press the
[ ]
button to confirm the clock
setting. The display will show "MEMORY"
to indicate the setting has been stored and
return to “CLOCK”.
Note:
If you remove the boatʼs battery for a check or
repair, the clock will be reset, so user must set it
again.
Adjustment Mode
1. Press and hold the
[
D
]
button for more than 1
second to switch to the adjustment selection
display.
2. Press the
[
,
]
button to select the “item
name”.
“CLOCK” “SCROLL” “AUX SENS”
“TEL-SP” “TEL-SW”
∗ Some of the items will have ENT indicator
light on, the
[
]
button must be pressed to
display the setting value.
3. Turn the
[
ROTARY
]
knob to select the “desired
setting value”.
∗ After completing settings, press the
[
D
]
button
to return to the previous mode.
8. OTHER OPERATIONS
Setting the method for title scroll
Set auto scroll function for MP3/WMA title.
∗ The factory default setting is “ON”.
2-1. Select “SCROLL”.
3-1. Turn the
[
ROTARY
]
knob to select “
ON” or
“OFF”.
ON:
To scroll automatically.
OFF:
To scroll just 1 time when the title was changed.
Setting the car speaker output for the
cellular phone
∗ The factory default setting is “RIGHT”.
∗ To output the telephone calls, set the cellular phone
interrupt to ON.
2-1. Select “TEL-SP”.
3-1. Turn the
[
ROTARY
]
knob to select “
RIGHT”
or “LEFT”.
Note:
For telephone interrupt, AUX SENS is always
"MID".
“RIGHT”
Telephone calls can be heard on the front right
speaker connected to this unit.
“LEFT”
Telephone calls can be heard on the front left
speaker connected to this unit.
Selecting AUX IN sensitivity
Make the following settings to select the sensi-
tivity when sounds from external devices con-
nected to this unit are difficult to hear even after
adjusting the volume.
∗ The factory default setting is “MID”.
2-1. Select “AUX SENS”.
3-1. Turn the
[
ROTARY
]
knob to select “
LOW”,
“MID” or “HIGH”.
Cellular phone interrupt setting
If you connect this unit and your cellular phone
with a separately sold unit, you can listen to your
telephone calls on your boat speakers.
∗ The factory default setting is “OFF”.
2-1. Select “TEL-SW”.
3-1. Turn the
[
ROTARY
]
knob to select the set
-
ting.
Each time you turn the
[
ROTARY
]
knob, the
setting changes in the following order:
OFF ON MUTE.
OFF:
This unit continues normal operation even when
the cellular phone is used.
ON:
You can listen to your telephone calls from the
speakers connected to this unit.