Filter
Top Products
9
iD100
ENGLISH
5. USB connection
Used to sync your Apple device with iTunes
TM
. Connect the
USB port to your PC using a high quality USB cable (Type B
to Type A).
6. +12V DC In terminal
Connect the iD100 to the supplied AC adaptor only.
7. Video output
To view video content connect the iD100 Video Out (Jack
Socket, 4-Pole) to a TV/monitor using the supplied cable.
See below for the right Video Format Selection switch
setting.
Note: Also make sure the right source input is selected on
the TV/Monitor.
Composite – Connect the iD100 to a TV/monitor with the
supplied cable using the single Yellow/Blue RCA/PHONO
connector.
Component – Component (Y, Pb, Pr) is a superior quality
alternative. Connect the iD100 to a TV/monitor with the
supplied component cable using all three RCA connectors.
Make sure the colour coded RCA’s are plugged into the
matching connectors (RED/GREEN/BLUE) on the
TV/Monitor.
S-Video – S-Video can also be used but you will need to
obtain a suitable mini-jack to S-Video such as those used
by camcorders. Contact your dealer for details.
Video select switch
Set the toggle switch to select the correct video format
output.
Switch position Label Cable connection
Top CVBS Composite
Middle S-Video Own cable must be used
Bottom YPbPr Component
Red
Component (Pr)
Component (Y)
Component (Pb) or
Composite (CVBS)
Jack
Green
Blue/Yellow