CCRadio-SWP Page 15
station. There is a log in the back of this
manual on pages 28-31 to help you
organize your stations. Your memories
will not be lost when batteries go dead or
if you reset the radio.
DISPLAY button
The DISPLAY button works in two ways:
1. When the radio is “on” the LCD display
normally shows the frequency. Pressing
the “DISPLAY” button will toggle the dis-
play through “ALARM TIME”, “TIME” of
day, and “SLEEP” timer status. It will
show the minutes left on the “SLEEP”
timer or “on” if the sleep timer is not
being used.
2. When the radio is “off” the LCD display
normally shows the time of day. Pressing
the “DISPLAY” button will toggle the dis-
play through “ALARM TIME”, tuning
steps for AM, and your choice of 12 or
24 hour clock format. While the radio is
“off”, you can change from 12 hour to 24
hour clock format by holding the “DIS-
PLAY” button for five seconds. Change it
back using the same method. See
{
“BAND” button on page 17 to change
tuning steps for AM.
Features and Operation Explained
T