Filter
Top Products
724-746-5500 | blackbox.com Page 13
Chapter 4: LED Indicators
4. LED Indicators
The LED indicators give you instant feedback on status of the converter.
Table 4-1. LED indicators and their functions.
LED State Indication
PWR Steady Power on
Off Power off
100 (Mbps) Steady Connected at 100 Mbps speed
Off Connected at 10 Mbps speed
LNK/ACT Steady A valid network connection is established
Flashing Transmitting or receiving data
Off Valid connection not established, and the
unit is not transmitting/receiving data
FDX/COL Steady Connected in full-duplex mode
Flashing Collision occurred
Off Connected in half-duplex mode