Filter
Top Products
27
equalizer functions are also available when you play back a recorded
program. Refer to "Repeat play" on page 23, "Selecting an EQ mode" on
page 24, and "Selecting a playback speed" on page 24 for more details.
Using the recorder function
The Joybee 200 has a recording function to enable you to
record your voice using the built-in microphone or an
external audio signal as follows.
• Recording function will be disabled when the battery is low.
1. Press the key to start recording and speak into the
microphone.
2. Press the key to pause recording and press it again to
resume recording.
3. Press and hold the key for 2 seconds to stop record-
ing.
Refer to "Setting the recording options" on page 30 for
more details about setting the recording parameters.
All recorded programs are saved as MP3 files with filenames such as
MIC0101 or LINE0101. The prefix indicates the source of the recording
and the number at the end of the filenames refers to date and the order
in which the programs were recorded. These files are saved in the
MICIN or LINEIN folders on the Joybee200. Use the procedure
described in "Playing back recorded audio files" on page 28 to listen to
your recorded programs. The repeat play, multiple playback speeds,
and equalizer functions are also available when you play back a
recorded program. Refer to "Repeat play" on page 23, "Selecting an EQ
mode" on page 24, and "Selecting a playback speed" on page 24 for
more details.