Filter
Top Products
7
1. Installing the system between the driver/passenger seat
(Refer to Figure 3)
Figure 3.
1. Take one of the supplied straps from the lower compartment
of the bag, and connect the latch to the upper metal ring on
the left side of the bag. Attach the “S” hook to the same ring
after looping the strap around the headrest of the driver’s seat.
Repeat this process for the right side (Passenger Seat).
2. Take another strap and connect the latch to lower metal ring
on the left side of the bag. Attach the “S” hook to the same ring
after looping the strap around the driver’s seat rail. Repeat
this process for the right side. In some vehicles, it may be
necessary to attach the “S” connector directly to the rail, as it
may not be long enough to reach back to the ring.
3. Adjust the straps tightly so that the bag is secured.
4. Swing the monitor upwards and adjust the screen for the de-
sired viewing angle.