Filter
Top Products
6
E. Installation
1.Installing the System onto the seat back in a car
(Refer to Figure 2)
Figure 2.
1. Unfasten the Velcro strap on the rear of the bag. Fold the
strap into the shape of a triangle and fasten it to the lower
Velcro strip.
2. Take one of the supplied straps from the lower compartment.
Connect the latch to one of the upper metal rings on the
mounting bag. Connect the “S” hook to the other upper metal
ring and place the loop over the headrest. Adjust the strap
until the bag is firmly secured.
3. Take one of the supplied straps from the lower compartment
of the bag, and connect the latch to the lower metal ring on
the left side of the bag. Attach the “S” hook to the same ring
after looping the strap around the seat rail. Repeat this pro-
cess for the right side. In some vehicles, it may be neces-
sary to attach the “S” connector to the rail directly, as it may
not be long enough to reach back to the ring.
4. Adjust the straps tightly so that the bag is secured.