Filter
Top Products
29
H. Playing a Video Game (Refer to Figure 40)
Figure 40. Adding Additional Monitor(s) and Video Game
Plug the video output from your game system into the supplied
AV adaptor cable and connect it to the AV input Jack on the right
side of the monitor. Set the DVD/AV switch to AV, and then adjust
the volume control and the brightness control on the monitor for
individual preference.
Note: Put the DVD AUX/AUX IN switch on the right side of the
monitor at “AUX IN” position.
I. Picture on the monitor
The picture UP/DOWN button (shown in Figure 42.) is used to rotate
the veiwing angle so the the VBP3800 can be positioned as shown
in either Figure 41 or 42.
1) When the unit is positioned as shown in Figure 41. the button
should be in the UP “ ” position. (i.e. In home use)