Filter
Top Products
12
REMOTE CONTROL OPERATION
Battery Installation/Replacement
Remove the battery compartment cover according to the diagram below.
1. Press the ridged area to the left.
2. At the same time, pull the battery tray out.
3. Remove the old CR2025 battery. Replace it with
a new CR2025 lithium battery on the tray with the
positive side facing upward.
4. Replace the cover.
Note: Do not expose the battery to excessive heat.
1
2
1. ANGLE
Press to switch the viewing angles.
Note: This function only works with discs
encoded with multiple camera
angles.
2. FUNCTION
Press to switch between the 16:9 and 4:3
aspect ratios.
3. SETUP
Press to enter/exit the Setup Menu.
4. REPEAT
Press to switch the repeat modes.
Note: For VCD 2.0 discs, this function is
invalid when the PBC function is
activated.
5. TITLE
Press to return to the title menu of a
DVD disc.
6. PREVIOUS ( )/UP
Press to skip to the previous chapter/track.
Press to navigate in the up direction when
a menu is displayed on the screen.
7. FAST REWIND ( )/LEFT
Press repeatedly for fast reverse playback.
The available speeds are 2X, 4X, 8X, 16X,
and 32X.
Press to navigate in the left direction when
a menu is displayed on the screen.
Remote Control Functions
1
2
3
5
4
6
7