Audiovox D1750T Portable DVD Player User Manual


 
- 19 -
POWER SUPPLY
Charging the Battery Pack
The battery must be attached to the DVD player to charge it. Plug the
Power Adapter into the Player’s DC-IN 12 V Jack, which is located on left
Side of the DVD Player. Plug the other end of the Power Cord into a wall
Outlet.
Detaching The Battery Pack
If the DVD Player is not going to be used for long periods of time, the Battery
Pack should be detached. When the DVD Player is turned OFF, the DVD
Player is still consuming some power in STANDBY mode. This could lead to
discharging the battery.
Make sure the power is turned OFF before detaching the Battery Pack. After
detaching the battery pack, take care when handling the DVD Player.
1) Place the player on a soft and smooth surface with its back cover up to
avoid scratching the screen.
2) Press the button located on the backside of the unit to unlock the
battery pack and while pressing the button pull the battery pack out from
the DVD Player.
NOTE: When attaching or detaching the battery pack, make sure to protect
the LCD screen.