Filter
Top Products
24
25
Connecting/Disconnecting the AV300
Macintosh™ OS X (10.2 Jaguar and newer)
If you have OS 10.2, you must update to version 10.2.4 or newer.
This is a free update from Apple
®
Computer. You will not require
any special installation of software drivers or extensions. You
simply plug the AV300 into your Macintosh as enumerated
above, and within a few seconds, the AV300 will be recognized
as a mass storage device (Hard Disk) and mount on the desktop.
You can now use the Hard disk called JUKEBOX like any other
external hard disk.
Windows™ ME, 2000, XP (Home/professional)
When connected, the AV300 will be
recognized as a Mass Storage Device
and mount automatically within a
few seconds of being connected. Do
not use the drivers on the CD-ROM,
those are for Windows98SE. You will
see a new drive letter, such as E: in
My Computer called JUKEBOX. You
can now use the hard disk called
JUKEBOX like any other external hard
disk. Simply access it using Windows™
Explorer to drag and drop les to and
from the AV300’s hard disk. If it is not
automatically recognized, please
refer to the troubleshooting section at
the back of this manual.
Windows
®
98SE
When you rst plug an AV300 into a computer running Windows™ 98SE, it will recognize
the hardware and ask to have drivers installed. Carefully follow the instructions below.
After installation of the drivers and restarting the computer, you will be able to drag
and drops le between your computer and the AV300 using Windows
®
Explorer. Be
careful also to understand the correct disconnection procedure in section 5.2. Incorrect
disconnection can cause your computer to freeze or you may loose data.